Skip to content

GS553 NM-C961 BIOS

BIOS NM-C961 Added: May 3, 2023 RAR · 4 MB

File details

TypeBIOS
Board numberNM-C961
PlatformGS553
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size4 MB
Markstested by uploader
AddedMay 3, 2023
Updated
Original file nameGS453 GS553 NM-C961 REV 1.0 WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
GS453 GS553 NM-C961 REV 1.0 WORKING BIOS 100%

BIOS dump for the Compal NM-C961 laptop board, revision 1.0, platform GS553, shared as a RAR archive of about 4 MB. The uploader marked it as tested, though that is their own claim and not something the catalog has checked. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number NM-C961 and revision 1.0 match your motherboard, and save a backup of the original chip contents first.

The catalog also lists 1 schematic, 1 boardview file, and 3 BIOS dumps for board NM-C961.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: GS553 NM-C961. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal