Skip to content

GS55C NM-C952 BIOS (REV 1.0)

BIOS NM-C952 Added: May 15, 2024 RAR · 7 MB

File details

TypeBIOS
Board numberNM-C952
PlatformGS55C
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size7 MB
Markstested by uploader
AddedMay 15, 2024
Updated
Original file nameGS55C NM-C952 REV 1.0 2019-11-12 WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
GS55C NM-C952 REV 1.0 2019-11-12 WORKING BIOS 100%

BIOS dump for the Compal NM-C952 laptop board, platform GS55C, PCB revision 1.0. The archive is a RAR file of about 7.0 MB and is marked as tested by the uploader, though that claim has not been checked by this catalog. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number NM-C952 and revision 1.0 match your motherboard, and save the original chip contents as a backup.

For board NM-C952 the catalog also has 1 schematic, 1 boardview file, and 5 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: GS55C NM-C952. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal