Skip to content

HP 14 CM0010AU 6050A2983601 BIOS

BIOS 6050A2983601 Added: Nov 16, 2021 ZIP · 4.8 MB

File details

TypeBIOS
BrandHP
Model14 CM0010AU
Board number6050A2983601
Board maker (ODM)Inventec
DeviceLaptop
FormatZIP
Size4.8 MB
AddedNovember 16, 2021
Updated
Original file nameBios_hp_14_cm0010au_14_AMD_SR_FT_4_6050A2983601_MB_A02A2_UMA.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP 14 CM0010AU laptop, board number 6050A2983601, made by Inventec. The archive is a ZIP of about 4.8 MB, and the original file name references MB_A02A2_UMA, which suggests a particular board variant. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, compare the board number and revision on your motherboard with the file name, and read out and save the original chip contents as a backup.

For board 6050A2983601 the catalog also has 1 boardview file and 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP 14 CM0010AU 6050A2983601. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal