Skip to content

HP 15-BD003TX LA-D704P BIOS (REV 40, 8 MB)

BIOS LA-D704P Added: Mar 3, 2018 RAR · 5.2 MB

File details

TypeBIOS
BrandHP
Model15-BD003TX
Board numberLA-D704P
Board maker (ODM)Compal
Revision40
DeviceLaptop
FormatRAR
Size5.2 MB
BIOS chip size8 MB
Marksincludes EC firmware
AddedMarch 3, 2018
Updated
Original file namehp-15-bd003tx-la-d704p-rev40-bid81ec-W25Q64-gME bios&ec.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP 15-BD003TX laptop, board LA-D704P from Compal, revision 40, supplied for an 8 MB flash chip and including EC/KBC firmware. The file is a RAR archive of about 5.2 MB. Technicians use a BIOS dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or a failed update, and the EC firmware is relevant when the keyboard controller is affected. Before flashing, confirm that the board number and revision match your motherboard, and save the original chip contents first.

For board LA-D704P the catalog also has 8 schematics, 2 boardview files, and 18 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP 15-BD003TX LA-D704P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal