Skip to content

HP 15-N265ST DA0U92MB6D0 BIOS

BIOS DA0U92MB6D0 Added: Mar 12, 2019 RAR · 2.3 MB

File details

TypeBIOS
BrandHP
Model15-N265ST
Board numberDA0U92MB6D0
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatRAR
Size2.3 MB
BIOS chip size4 MB
AddedMarch 12, 2019
Updated
Original file nameHP 15-n265st (DA0U92MB6D0 REV.D ) 25Q32FV original OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP 15-N265ST laptop, board DA0U92MB6D0 revision D, built by Quanta and supplied for a 4 MB flash chip. The original file name notes a 25Q32FV chip and marks the dump as original, and the archive is about 2.3 MB in RAR format. Technicians use a dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision match your board before flashing, and back up the original chip contents first.

The catalog also lists 1 schematic, 1 boardview file, and 6 BIOS dumps for board DA0U92MB6D0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP 15-N265ST DA0U92MB6D0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal