Skip to content

HP 15-P022NE DAY11AMB6E0 BIOS

BIOS DAY11AMB6E0 Added: Sep 28, 2021 RAR · 3.9 MB

File details

TypeBIOS
BrandHP
Model15-P022NE
Board numberDAY11AMB6E0
Board maker (ODM)Quanta
DeviceLaptop
FormatRAR
Size3.9 MB
Markstested by uploader
AddedSeptember 28, 2021
Updated
Original file nameBIOS HP 15-P022NE DAY11AMB6E0 TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP 15-P022NE laptop, board number DAY11AMB6E0 from Quanta, delivered as a RAR archive of about 3.9 MB. The uploader marked it as tested, though that is their own note and not a verification by this catalog. A BIOS dump is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and read and back up the original chip contents so you can restore them if something goes wrong.

For board DAY11AMB6E0 the catalog also has 2 schematics, 2 boardview files, and 25 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP 15-P022NE DAY11AMB6E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal