Skip to content

HP 810 G3 OVATION 14209-1 BIOS

BIOS 14209-1 Added: May 10, 2023 RAR · 8 MB

File details

TypeBIOS
BrandHP
Model810 G3
Board number14209-1
PlatformOVATION
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size8 MB
Markstested by uploader
AddedMay 10, 2023
Updated
Original file nameHP_810_G3_Ovation_MB_14209_1_448_02P02_0011_WORKING_BIOS_100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP 810 G3 Ovation MB 14209-1 448.02P02-0011 WORKING BIOS 100%

BIOS dump for the HP 810 G3 laptop on the Wistron 14209-1 board (platform OVATION), packaged as an 8 MB RAR archive. The uploader marked it as tested. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents so you can recover if the write goes wrong.

The catalog also lists 2 BIOS dumps for board 14209-1.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP 810 G3 OVATION 14209-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal