Skip to content

HP 840 G4 6050A2854301 BIOS (clean ME)

BIOS 6050A2854301 Added: Jul 11, 2023 RAR · 18 MB

File details

TypeBIOS
BrandHP
Model840 G4
Board number6050A2854301
Board maker (ODM)Inventec
DeviceLaptop
FormatRAR
Size18 MB
Marksclean ME, tested by uploader, fast boot
AddedJuly 11, 2023
Updated
Original file nameHP 840 G4 840 G3 6050A2854301-MB-A01 WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP 840 G4 840 G3 6050A2854301-MB-A01 WORKING BIOS 100% CLEAR ME FAST BOOT

HP 840 G4 BIOS dump for the Inventec-built laptop board 6050A2854301, file name referencing 6050A2854301-MB-A01 and noted for the HP 840 G3 as well. The archive is a RAR of about 17.9 MB, with a cleaned Intel ME region and fast boot enabled, and the uploader marks it as tested. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update.

The catalog also lists 9 BIOS dumps for board 6050A2854301.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP 840 G4 6050A2854301. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal