Skip to content

HP Chromebook 11 G3 DA0Y07MBAF1 BIOS

BIOS DA0Y07MBAF1 Added: Nov 30, 2020 RAR · 1.2 MB

File details

TypeBIOS
BrandHP
ModelChromebook 11 G3
Board numberDA0Y07MBAF1
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size1.2 MB
AddedNovember 30, 2020
Updated
Original file nameHP Chromebook 11 G3 DA0Y07MBAF1 REV F Windows Bios.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP Chromebook 11 G3 laptop, board number DA0Y07MBAF1, revision F, from the Quanta design. The archive is a RAR file of about 1.2 MB, shared under the name HP Chromebook 11 G3 DA0Y07MBAF1 REV F Windows Bios. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after corruption or a failed update. Before flashing, confirm that the board number and revision on your motherboard match DA0Y07MBAF1 and REV F, and back up the original chip contents so you can restore them if needed.

The catalog also lists 1 schematic and 1 boardview file for board DA0Y07MBAF1.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Chromebook 11 G3 DA0Y07MBAF1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal