Skip to content

HP Compaq CQ61-411WM DA00P8MB6D1 BIOS

BIOS DA00P8MB6D1 Added: Jul 29, 2023 RAR · 3.6 MB

File details

TypeBIOS
BrandHP
ModelCompaq CQ61-411WM
Board numberDA00P8MB6D1
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatRAR
Size3.6 MB
Markstested by uploader
AddedJuly 29, 2023
Updated
Original file nameCompaq CQ61-411WM DA00P8MB6D1 REV.D TESTED BIOS OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
Compaq CQ61-411WM DA00P8MB6D1 REV.D TESTED BIOS OK

BIOS dump for the HP Compaq CQ61-411WM laptop, board number DA00P8MB6D1, revision D, built by Quanta. The uploader marked it as tested, though the catalog cannot confirm that. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, check that the board number and revision match your motherboard exactly, and back up the original chip contents so you can recover if the write goes wrong.

For board DA00P8MB6D1 the catalog also has 1 schematic and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Compaq CQ61-411WM DA00P8MB6D1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal