Skip to content

HP DA0P5HMB8F1 BIOS (REV F, 16 MB)

BIOS DA0P5HMB8F1 Added: Aug 4, 2024 RAR · 24 MB

File details

TypeBIOS
BrandHP
Board numberDA0P5HMB8F1
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size24 MB
BIOS chip size16 MB
Markstested by uploader
AddedAugust 4, 2024
Updated
Original file nameHP 15 DA0P5HMB8F1 REV F 16MB TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP 15 DA0P5HMB8F1 REV F 16MB TESTED OK 087FD 087FE 089BB

BIOS dump for the HP 15 laptop, Quanta board DA0P5HMB8F1, revision F, supplied for a 16 MB SPI flash chip. The uploader marks it as tested, though that is their own note and not something the catalog has checked. Technicians use a BIOS dump like this to reprogram the flash with a programmer after a corrupted BIOS or a failed update. Confirm the board number and revision match your motherboard before writing anything, and back up the original chip contents first so you can recover if the write goes wrong.

For board DA0P5HMB8F1 the catalog also has 1 boardview file and 4 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP DA0P5HMB8F1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal