Skip to content

HP DA0X9KMB8E0 BIOS

BIOS DA0X9KMB8E0 Added: Jun 16, 2024 RAR · 5 MB

File details

TypeBIOS
BrandHP
Board numberDA0X9KMB8E0
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size5 MB
BIOS chip size16 MB
Markstested by uploader
AddedJune 16, 2024
Updated
Original file nameHP_DA0X9KMB8E0_REVE_W25Q128JVSQ_8K_BIT_OTP_16MB_WORKING_BIOS_100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP DA0X9KMB8E0 REVE W25Q128JVSQ (8K BIT OTP) 16MB WORKING BIOS 100%

BIOS dump for an HP laptop, Quanta-built board DA0X9KMB8E0, revision E, supplied as a 16 MB image in a RAR archive of about 5 MB. The uploader marked it as tested. Technicians use a dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your board and back up the original chip contents. The original file name also points to a W25Q128JVSQ chip, so check that your flash part is compatible.

For board DA0X9KMB8E0 the catalog also has 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP DA0X9KMB8E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal