Skip to content

HP DA0Y0FMBAJ1 BIOS

BIOS DA0Y0FMBAJ1 Added: Feb 20, 2024 RAR · 12 MB

File details

TypeBIOS
BrandHP
Board numberDA0Y0FMBAJ1
Board maker (ODM)Quanta
RevisionJ
DeviceLaptop
FormatRAR
Size12 MB
BIOS chip size16 MB / 8 MB
Markstested by uploader
AddedFebruary 20, 2024
Updated
Original file nameHP DA0Y0FMBAJ1 REV J 8MB & 16MB WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP DA0Y0FMBAJ1 REV J 8MB & 16MB WORKING BIOS 100%

BIOS dump for the HP laptop board DA0Y0FMBAJ1, revision J, built by Quanta and supplied for both 16 MB and 8 MB flash chips. The uploader marks it as tested, though that is their own claim and not verified here. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and back up the original chip contents so you can restore them if needed. The archive is a 12.3 MB RAR file.

For board DA0Y0FMBAJ1 the catalog also has 1 schematic, 1 boardview file, and 7 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP DA0Y0FMBAJ1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal