Skip to content

HP DAG72EMB6D0 BIOS

BIOS DAG72EMB6D0 Added: Apr 2, 2023 RAR · 11 MB

File details

TypeBIOS
BrandHP
Board numberDAG72EMB6D0
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatRAR
Size11 MB
Markstested by uploader, includes EC firmware
AddedApril 2, 2023
Updated
Original file nameHP 14 DAG72EMB6D0 REV D WORKING BIOS & KBEC 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP 14 DAG72EMB6D0 REV D WORKING BIOS & KBEC 100%

BIOS dump for the HP 14 laptop, Quanta board DAG72EMB6D0, revision D, packaged as a 11.3 MB RAR archive. The uploader marks it as tested and says it includes the EC/KBC firmware. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match DAG72EMB6D0 REV D, and back up the original chip contents first.

For board DAG72EMB6D0 the catalog also has 1 schematic, 1 boardview file, and 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP DAG72EMB6D0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal