Skip to content

HP DAR23GMB6B1 BIOS

BIOS DAR23GMB6B1 Added: Feb 10, 2024 RAR · 2.8 MB

File details

TypeBIOS
BrandHP
Board numberDAR23GMB6B1
Board maker (ODM)Quanta
RevisionB
DeviceLaptop
FormatRAR
Size2.8 MB
Markstested by uploader
AddedFebruary 10, 2024
Updated
Original file nameHP PAVILION DAR23GMB6B1 REV B AMD 218-0755046 TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP PAVILION DAR23GMB6B1 REV B AMD 218-0755046 TESTED OK

This is a BIOS dump for an HP laptop, board number DAR23GMB6B1, revision B, from the Quanta ODM. The uploader marked it as tested, though that is their claim and not something the catalog has checked. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your board, and back up the original chip contents so you can recover if something goes wrong. The archive is RAR and about 2.8 MB in size.

For board DAR23GMB6B1 the catalog also has 1 schematic and 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP DAR23GMB6B1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal