Skip to content

HP DV6 DV7 DAUT1AMB6E0 BIOS

BIOS DAUT1AMB6E0 Added: Nov 12, 2022 RAR · 1.7 MB

File details

TypeBIOS
BrandHP
ModelDV6 DV7
Board numberDAUT1AMB6E0
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size1.7 MB
Markstested by uploader
AddedNovember 12, 2022
Updated
Original file nameHP DV6 DV7 DAUT1AMB6E0 REV E AMD WORKING BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP DV6 DV7 DAUT1AMB6E0 REV E AMD WORKING BIOS

BIOS dump for the HP DV6 and DV7 laptops, board number DAUT1AMB6E0, revision E, with Quanta listed as the ODM. The uploader marked it as tested, and the archive is a RAR of about 1.7 MB. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision printed on your motherboard match, and back up the original chip contents so you can recover if something goes wrong.

For board DAUT1AMB6E0 the catalog also has 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP DV6 DV7 DAUT1AMB6E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal