Skip to content

HP EliteBook x360 1030 G3 DA0Y0PMBAF0 BIOS (REV E, 32 MB / 16 MB)

BIOS DA0Y0PMBAF0 Added: Dec 14, 2022 RAR · 15 MB

File details

TypeBIOS
BrandHP
ModelEliteBook x360 1030 G3
Board numberDA0Y0PMBAF0
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size15 MB
BIOS chip size32 MB / 16 MB
Markstested by uploader
AddedDecember 14, 2022
Updated
Original file nameHP_EliteBook_X360_1030_G3_Notebook_PC_DA0Y0PMBAF0_REV_E_16MB_&_32MB.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP EliteBook X360 1030 G3 Notebook PC DA0Y0PMBAF0 REV F 16MB & 32MB WORKING BIOS

BIOS dump for the HP EliteBook x360 1030 G3 laptop, Quanta board DA0Y0PMBAF0, revision E, for 32 MB and 16 MB chips. The uploader marked it as tested, which is their claim rather than something checked here. The file name says REV E while the caption says REV F, so confirm the revision on your board first. Technicians use it to reprogram the SPI flash after corruption or a failed update, backing up the original chip first.

For board DA0Y0PMBAF0 the catalog also has 6 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP EliteBook x360 1030 G3 DA0Y0PMBAF0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal