Skip to content

HP Envy 15-K211NE DAY31AMB6C0 BIOS (REV C)

BIOS DAY31AMB6C0 Added: Mar 3, 2019 RAR · 4.2 MB

File details

TypeBIOS
BrandHP
ModelEnvy 15-K211NE
Board numberDAY31AMB6C0
Board maker (ODM)Quanta
RevisionC
DeviceLaptop
FormatRAR
Size4.2 MB
AddedMarch 3, 2019
Updated
Original file nameHP ENVY 15-k211ne, DAY31AMB6C0 Rev C.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

This is a BIOS dump for the HP Envy 15-K211NE laptop, board number DAY31AMB6C0, revision C, produced by Quanta. The archive is a RAR file of about 4.2 MB, named HP ENVY 15-k211ne, DAY31AMB6C0 Rev C.rar. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and back up the original chip contents so you can recover if something goes wrong.

The catalog also lists 3 schematics, 1 boardview file, and 5 BIOS dumps for board DAY31AMB6C0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Envy 15-K211NE DAY31AMB6C0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal