Skip to content

HP Envy x360 2 IN1 LA-N471P BIOS

BIOS LA-N471P Added: Apr 21, 2025 RAR · 22 MB

File details

TypeBIOS
BrandHP
ModelEnvy x360 2 IN1
Board numberLA-N471P
Board maker (ODM)Compal
DeviceLaptop
FormatRAR
Size22 MB
BIOS chip size32 MB
AddedApril 21, 2025
Updated
Original file nameHP envy X360 2 in1 14-fc0023dx LA-N471P 32MB BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP envy X360 2 in1 14-fc0023dx LA-N471P 32MB BIOS

BIOS dump for the HP Envy x360 2 in1 laptop, board number LA-N471P from Compal, supplied for a 32 MB flash chip in a RAR archive of about 22.3 MB. The original file name references the 14-fc0023dx variant. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents so you can restore them if something goes wrong.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Envy x360 2 IN1 LA-N471P. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal