Skip to content

HP Envy x360 M6 BIOS

BIOS Added: Apr 3, 2018 ZIP · 4.7 MB

File details

TypeBIOS
BrandHP
ModelEnvy x360 M6
DeviceLaptop
FormatZIP
Size4.7 MB
AddedApril 3, 2018
Updated
Original file nameHP_Envy_X360_M6_W103DX_laduree_SKY.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP Envy x360 M6 laptop, delivered as a ZIP archive of about 4.7 MB under the original file name HP_Envy_X360_M6_W103DX_laduree_SKY.zip. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. No board number, revision or chip size is listed for this file, so confirm the board identity against your own hardware before flashing. Back up the original chip contents first, so you can restore them if the new image does not behave as expected.

The catalog also lists 7 BIOS dumps for the HP Envy x360 M6.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Envy x360 M6. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal