Skip to content

HP G6-2000 DAR33HMB6A0 BIOS

BIOS DAR33HMB6A0 Added: Jul 20, 2024 ZIP · 3.5 MB

File details

TypeBIOS
BrandHP
ModelG6-2000
Board numberDAR33HMB6A0
Board maker (ODM)Quanta
RevisionA
DeviceLaptop
FormatZIP
Size3.5 MB
Marksincludes EC firmware
AddedJuly 20, 2024
Updated
Original file nameHp g6-2000 R33H DAR33HMB6A0 REV-A Bios + EC.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP G6-2000 laptop, board number DAR33HMB6A0, revision A, from the Quanta platform. The archive also includes EC/KBC firmware, so the embedded controller can be restored alongside the BIOS. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision printed on your motherboard match before writing anything, and back up the original chip contents first so you can recover if the process goes wrong.

For board DAR33HMB6A0 the catalog also has 1 schematic, 1 boardview file, and 4 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP G6-2000 DAR33HMB6A0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal