Skip to content

HP Pavilion 14-AL028TX DAG31AMB6D0 BIOS

BIOS DAG31AMB6D0 Added: Sep 1, 2018 RAR · 4.8 MB

File details

TypeBIOS
BrandHP
ModelPavilion 14-AL028TX
Board numberDAG31AMB6D0
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatRAR
Size4.8 MB
Marksclean ME
AddedSeptember 1, 2018
Updated
Original file nameHP Pavilion 14-al028tx DAG31AMB6D0 REV D ME B01.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP Pavilion 14-AL028TX Quanta G31 DAG31AMB6D0 REV:D BIOS CLEARME I5-6200U

BIOS dump for the HP Pavilion 14-AL028TX laptop, board number DAG31AMB6D0, revision D, made by Quanta. The dump has the Intel ME region cleaned, so it is prepared for reflashing with a programmer after a corrupted BIOS or a failed update. Technicians use this kind of file to rewrite the SPI flash chip directly. Before flashing, confirm that the board number and revision on your motherboard match the dump, and save a backup of the original chip contents first.

For board DAG31AMB6D0 the catalog also has 1 schematic, 1 boardview file, and 5 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion 14-AL028TX DAG31AMB6D0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal