Skip to content

HP Pavilion 14 CE3510SA DAG7ALMB8C0 BIOS

BIOS DAG7ALMB8C0 Added: Jun 17, 2023 RAR · 15 MB

File details

TypeBIOS
BrandHP
ModelPavilion 14 CE3510SA
Board numberDAG7ALMB8C0
Board maker (ODM)Quanta
RevisionC
DeviceLaptop
FormatRAR
Size15 MB
AddedJune 17, 2023
Updated
Original file nameHP_Pavilion_14_ce3510sa_086AA_DAG7ALMB8C0_REV_C_F_18_BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP Pavilion 14-ce3510sa (086AA) (DAG7ALMB8C0 REV_C) (F.18) BIOS

BIOS dump for the HP Pavilion 14 CE3510SA laptop, board DAG7ALMB8C0 revision C, built by Quanta and listed under BIOS version F.18. The archive is a RAR file of about 15.1 MB. A technician would use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision match your board before flashing, and back up the original chip contents first.

The catalog also lists 1 schematic and 6 BIOS dumps for board DAG7ALMB8C0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion 14 CE3510SA DAG7ALMB8C0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal