Skip to content

HP Pavilion 15 CS1000TX HP DAG7BDMB8F0 BIOS

BIOS DAG7BDMB8F0 Added: Oct 5, 2022 RAR · 6.6 MB

File details

TypeBIOS
BrandHP
ModelPavilion 15 CS1000TX HP
Board numberDAG7BDMB8F0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size6.6 MB
Markstested by uploader
AddedOctober 5, 2022
Updated
Original file nameHP_Pavilion_15_cs1000tx,HP_Pavilion_Laptop_15_cs1xxx_DAG7BDMB8F0.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP_Pavilion_15_cs1000tx,HP_Pavilion_Laptop_15_cs1xxx_DAG7BDMB8F0 REV F

BIOS dump for the HP Pavilion 15 CS1000TX laptop on board DAG7BDMB8F0, revision F, from the Quanta design. The archive is a 6.6 MB RAR and is marked as tested by the uploader. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Confirm that the board number and revision match your motherboard before flashing, and read and save the original chip contents first so you can restore them if something goes wrong.

The catalog also lists 3 schematics and 4 BIOS dumps for board DAG7BDMB8F0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion 15 CS1000TX HP DAG7BDMB8F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal