Skip to content

HP Pavilion 24-B229C DA0N83MB6G0 BIOS

BIOS DA0N83MB6G0 Added: Jan 16, 2022 RAR · 8.4 MB

File details

TypeBIOS
BrandHP
ModelPavilion 24-B229C
Board numberDA0N83MB6G0
Board maker (ODM)Quanta
RevisionG
DeviceAll-in-one PC
FormatRAR
Size8.4 MB
BIOS chip size8 MB
AddedJanuary 16, 2022
Updated
Original file nameHP Pavilion All-in-One - 24-b229c 24 DA0N83MB6G0 REV G 8MB.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP Pavilion 24-B229C all-in-one PC, board number DA0N83MB6G0, revision G, built for an 8 MB SPI flash chip. The archive is a RAR file of about 8.4 MB, with the original name HP Pavilion All-in-One - 24-b229c 24 DA0N83MB6G0 REV G 8MB.rar. Technicians use a dump like this to reprogram the flash with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision match your board, and back up the original chip contents before writing anything.

For board DA0N83MB6G0 the catalog also has 1 schematic and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion 24-B229C DA0N83MB6G0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal