Skip to content

HP Pavilion 550 030Z BIOS

BIOS Added: Aug 21, 2022 RAR · 3.6 MB

File details

TypeBIOS
BrandHP
ModelPavilion 550 030Z
Revision1.01
DeviceLaptop
FormatRAR
Size3.6 MB
Markstested by uploader
AddedAugust 21, 2022
Updated
Original file nameHP_Pavilion_Desktop_550_030z_IPM87_MP_Rev_1_01_WORKING_BIOS_100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP Pavilion Desktop - 550-030z IPM87-MP Rev 1.01 WORKING BIOS 100%

BIOS dump for the HP Pavilion 550-030z, listed as a laptop in the facts, with the board revision 1.01 and an IPM87-MP file name that the uploader marked as tested. The archive is a RAR of about 3.6 MB. A dump like this is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents so you can restore them if needed.

For the HP Pavilion 550 030Z the catalog also has 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion 550 030Z. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal