Skip to content

HP Pavilion DV6 DA0UP6MB6F0 BIOS

BIOS DA0UP6MB6F0 Added: Jul 29, 2020 RAR · 1.2 MB

File details

TypeBIOS
BrandHP
ModelPavilion DV6
Board numberDA0UP6MB6F0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size1.2 MB
Marksincludes EC firmware
AddedJuly 29, 2020
Updated
Original file nameHP Pavilion DV6 DA0UP6MB6F0 BIOS & EC REV F.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP Pavilion DV6 laptop, board DA0UP6MB6F0 from Quanta, revision F. The package also includes EC/KBC firmware, so the embedded controller image is supplied alongside the BIOS. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update, and the EC image can be relevant when the keyboard controller needs reflashing. Confirm that the board number and revision match your motherboard before flashing, and back up the original chip contents first.

The catalog also lists 1 schematic and 2 BIOS dumps for board DA0UP6MB6F0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion DV6 DA0UP6MB6F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal