Skip to content

HP Pavilion DV6640ER AT1 DA0AT1MB8F1 BIOS (REV F)

BIOS DA0AT1MB8F1 Added: Dec 13, 2017 ZIP · 0.5 MB

File details

TypeBIOS
BrandHP
ModelPavilion DV6640ER
Board numberDA0AT1MB8F1
PlatformAT1
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatZIP
Size0.5 MB
AddedDecember 13, 2017
Updated
Original file nameHP_Pavilion_DV6640er=1=Quanta_AT1_Rev_F_(DA0AT1MB8F1).zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP Pavilion DV6640ER laptop, board number DA0AT1MB8F1, built by Quanta on platform AT1 and marked revision F. It is delivered as a ZIP archive of about 0.5 MB. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision printed on your motherboard match the file, and back up the original chip contents so you can recover if something goes wrong.

The catalog also lists 4 BIOS dumps for board DA0AT1MB8F1.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion DV6640ER AT1 DA0AT1MB8F1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal