Skip to content

HP Pavilion G7 DA0R13MB6E1 BIOS (REV E)

BIOS DA0R13MB6E1 Added: Jun 19, 2022 RAR · 1.9 MB

File details

TypeBIOS
BrandHP
ModelPavilion G7
Board numberDA0R13MB6E1
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size1.9 MB
Marksincludes EC firmware
AddedJune 19, 2022
Updated
Original file nameHP_Pavilion_g7_1375ea_R13_UMA_DA0R13MB6E1_Rev_E_BIOS_&_KBEC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the HP Pavilion G7 laptop, board number DA0R13MB6E1, revision E, from the Quanta design. The archive also includes EC/KBC firmware, so the embedded controller image is supplied alongside the main BIOS. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision printed on your motherboard match DA0R13MB6E1 Rev E, and save a full backup of the original chip contents first.

For board DA0R13MB6E1 the catalog also has 1 schematic, 1 boardview file, and 8 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Pavilion G7 DA0R13MB6E1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal