Skip to content

HP PAVILION15 DAY16EMB8C0 BIOS

BIOS DAY16EMB8C0 Added: Oct 24, 2020 RAR · 0.1 MB

File details

TypeBIOS
BrandHP
ModelPAVILION15
Board numberDAY16EMB8C0
Board maker (ODM)Quanta
RevisionC
DeviceLaptop
FormatRAR
Size0.1 MB
Marksincludes EC firmware
AddedOctober 24, 2020
Updated
Original file nameIT8987E_20201020_161107-day16emb8c0.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
TEST OK : HP PAVILION15 P270NE MB: DAY16EMB8C0 REV:C EC : IT8987E

BIOS dump for the HP Pavilion 15 laptop, board DAY16EMB8C0 revision C, made by Quanta, with EC/KBC firmware included. The original file name points to an IT8987E EC image, and the post marks the dump as tested. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match DAY16EMB8C0 rev C, and back up the original chip contents so you can recover if something goes wrong.

For board DAY16EMB8C0 the catalog also has 2 schematics and 8 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP PAVILION15 DAY16EMB8C0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal