Skip to content

HP TPN-Q208 DAG7BLMB8D0 BIOS (REV D, 16 MB)

BIOS DAG7BLMB8D0 Added: Apr 3, 2025 RAR · 7.8 MB

File details

TypeBIOS
BrandHP
ModelTPN-Q208
Board numberDAG7BLMB8D0
Board maker (ODM)Quanta
RevisionD
DeviceLaptop
FormatRAR
Size7.8 MB
BIOS chip size16 MB
AddedApril 3, 2025
Updated
Original file nameHP TPN-Q208 DAG7BLMB8D0 REVD 16MB.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP TPN-Q208 DAG7BLMB8D0 REVD 16MB

BIOS dump for the HP TPN-Q208 laptop, board number DAG7BLMB8D0, revision D, made for a 16 MB flash chip and supplied as a RAR archive of about 7.8 MB. The board is listed under Quanta as the manufacturer. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match DAG7BLMB8D0 and REV D, and read out and save the original chip contents as a backup.

For board DAG7BLMB8D0 the catalog also has 7 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP TPN-Q208 DAG7BLMB8D0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal