Skip to content

HP X360 11 DA00G2MB6G1 BIOS

BIOS DA00G2MB6G1 Added: Dec 23, 2023 RAR · 2.9 MB

File details

TypeBIOS
BrandHP
ModelX360 11
Board numberDA00G2MB6G1
Board maker (ODM)Quanta
RevisionG
DeviceLaptop
FormatRAR
Size2.9 MB
BIOS chip size16 MB
Markstested by uploader
AddedDecember 23, 2023
Updated
Original file nameHP X360 11 DA00G2MB6G1 REV G W25Q128F TESTED BIOS .rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP X360 11 DA00G2MB6G1 REV G W25Q128F TESTED BIOS

BIOS dump for the HP X360 11 laptop, board number DA00G2MB6G1, revision G, from the Quanta platform. The file is marked as tested by the uploader and covers a 16 MB flash chip. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and save a backup of the original chip contents. The uploader's tested mark is not an independent verification, so treat the result with care.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP X360 11 DA00G2MB6G1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal