Skip to content

HP X360 19798-1 BIOS

BIOS 19798-1 Added: Feb 1, 2023 RAR · 15 MB

File details

TypeBIOS
BrandHP
ModelX360
Board number19798-1
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size15 MB
Markstested by uploader
AddedFebruary 1, 2023
Updated
Original file nameHP_X360_PCB_FAROE1_2_ICL_UMA_MB_8L_19798_1_WORKING_BIOS_100%%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP X360 PCB FAROE1.2 ICL UMA MB 8L 19798-1 WORKING BIOS 100%%

BIOS dump for the HP X360 laptop, board number 19798-1 from Wistron, supplied as a RAR archive of about 15 MB. The uploader marked it as tested. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and save the original chip contents as a backup. The original file name also references FAROE1.2 and ICL UMA, which may help with identifying the board variant.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP X360 19798-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal