Skip to content

HP Z440 BIOS (REV 1)

BIOS Added: Jun 19, 2023 RAR · 6.9 MB

File details

TypeBIOS
BrandHP
ModelZ440
Revision1
DeviceLaptop
FormatRAR
Size6.9 MB
AddedJune 19, 2023
Updated
Original file nameHP_Z440_Z640_Z840_Workstation_System_BIOS_FM_1401_FAR_PCB_FAB_REV1.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP Z440 Z640 Z840 Workstation System BIOS FM-1401 FAR (PCB FAB REV1.00)

BIOS dump for the HP Z440 workstation, supplied as a RAR archive of about 6.9 MB. The original file name references the Z440, Z640 and Z840 workstation family, system BIOS FM-1401 FAR and PCB FAB REV1.00, so the revision is 1. A technician would use a dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and save the original chip contents as a backup.

For the HP Z440 the catalog also has 4 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP Z440. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal