Skip to content

HP ZBook G6 DAXW3EMBAF0 BIOS

BIOS DAXW3EMBAF0 Added: Jun 28, 2023 RAR · 19 MB

File details

TypeBIOS
BrandHP
ModelZBook G6
Board numberDAXW3EMBAF0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size19 MB
Markstested by uploader
AddedJune 28, 2023
Updated
Original file nameHP ZBOOK G6 17 DAXW3EMBAF0 Rev F.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HP ZBOOK G6 17 DAXW3EMBAF0 Rev F 32MB &16MB & 1MB

BIOS dump for the HP ZBook G6 laptop, board DAXW3EMBAF0 revision F, from the Quanta platform. The uploader marks it as tested, and the archive is about 19 MB in RAR format. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision on your motherboard match before flashing, and back up the original chip contents first so you can restore them if something goes wrong.

For board DAXW3EMBAF0 the catalog also has 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HP ZBook G6 DAXW3EMBAF0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal