Skip to content

HS762 NM-D761 BIOS

BIOS NM-D761 Added: Feb 26, 2023 RAR · 6.5 MB

File details

TypeBIOS
Board numberNM-D761
PlatformHS762
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size6.5 MB
Markstested by uploader
AddedFebruary 26, 2023
Updated
Original file nameHS462_HS562_HS762_NM_D761_REV_1_0_2021_10_26_WORKING_BIOS_100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
HS462 HS562 HS762 NM-D761 REV 1.0 2021-10-26 WORKING BIOS 100%

BIOS dump for the Compal NM-D761 laptop board, revision 1.0, on the HS762 platform. The file is packed as a RAR archive of about 6.5 MB and is marked as tested by the uploader. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your board, and back up the original chip contents so you can recover if the write goes wrong.

The catalog also lists 1 schematic and 1 boardview file for board NM-D761.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: HS762 NM-D761. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal