j&w -ph61a-usb3 BIOS
File details
| Type | BIOS |
|---|---|
| Format | RAR |
| Size | 2.5 MB |
| Marks | tested by uploader |
| Added | October 25, 2023 |
| Updated | |
| Original file name | j&w -ph61a-usb3 TESTED OK.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
j&w -ph61a-usb3 TESTED OK This is a BIOS dump archived as a RAR file of about 2.5 MB, listed under the name "j&w -ph61a-usb3". The uploader marked it as tested, though the facts do not say which board or platform it was tested on, so confirm the model yourself. The name suggests a J&W PH61A-USB3 board, but check the printed board number and revision before flashing. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after corruption or a failed update.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: j&w -ph61a-usb3. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.