JK4A0 NM-E111 BIOS
File details
| Type | BIOS |
|---|---|
| Board number | NM-E111 |
| Platform | JK4A0 |
| Board maker (ODM) | Compal |
| Revision | 1.0 |
| Device | Laptop |
| Format | RAR |
| Size | 40 MB |
| Marks | tested by uploader |
| Added | September 18, 2024 |
| Updated | |
| Original file name | JK4A0 NM-E111 REV 1.0 TESTED OK.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
JK4A0 NM-E111 REV 1.0 TESTED OK BIOS dump for a Compal laptop, board number NM-E111, platform JK4A0, PCB revision 1.0. The uploader marked it as tested, but that is their own note and has not been verified by the catalog. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match exactly, and read out and save the original chip contents as a backup. The archive is a RAR file of about 39.6 MB.
Description generated from the catalog data. ·
Browse more
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: JK4A0 NM-E111. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.