Skip to content

Lenovo DA0LI5MB6I0 BIOS (REV I)

BIOS DA0LI5MB6I0 Added: Dec 10, 2020 ZIP · 3.6 MB

File details

TypeBIOS
BrandLenovo
Board numberDA0LI5MB6I0
Board maker (ODM)Quanta
RevisionI
DeviceLaptop
FormatZIP
Size3.6 MB
Markstested by uploader
AddedDecember 10, 2020
Updated
Original file nameTHINKPAD YOGA 11E DA0LI5MB6I0 REVI DUMP .zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for a Lenovo laptop, board number DA0LI5MB6I0, revision I, built by Quanta. The original file name, THINKPAD YOGA 11E DA0LI5MB6I0 REVI DUMP, points to the ThinkPad Yoga 11e line. The uploader marked it as tested, but that is their note and not a verification. A dump like this is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your board, and back up the original chip contents first. The archive is a 3.6 MB ZIP.

For board DA0LI5MB6I0 the catalog also has 2 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo DA0LI5MB6I0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal