Skip to content

Lenovo E130 DA0LI2MB8F0 BIOS (REV F)

BIOS DA0LI2MB8F0 Added: May 29, 2023 RAR · 7 MB

File details

TypeBIOS
BrandLenovo
ModelE130
Board numberDA0LI2MB8F0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size7 MB
Markstested by uploader
AddedMay 29, 2023
Updated
Original file nameLENOVO_E130_DA0LI2MB8F0_REV_F_i3_3227U_3ICs_WORKING_BIOS_100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
LENOVO E130 DA0LI2MB8F0 REV F i3-3227U 3ICs WORKING BIOS 100%

BIOS dump for the Lenovo E130 laptop, board number DA0LI2MB8F0, revision F, from the Quanta design. The uploader marks it as tested, and the archive is about 7 MB in RAR format. A dump like this is used to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision match your board exactly, and back up the original chip contents first.

For board DA0LI2MB8F0 the catalog also has 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo E130 DA0LI2MB8F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal