Skip to content

LENOVO Flex 5 14ITL05 Laptop ideapad Type 82HS 203013 1 32MB BIOS

BIOS Added: Feb 27, 2025 RAR · 7.3 MB

File details

TypeBIOS
BrandLenovo
DeviceLaptop
FormatRAR
Size7.3 MB
BIOS chip size32 MB
AddedFebruary 27, 2025
Updated
Original file nameLENOVO_Flex_5_14ITL05_Laptop_ideapad_Type_82HS_203013_1_32MB_BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
LENOVO Flex_5_14ITL05_Laptop_ideapad_Type_82HS_203013_1 32MB BIOS

BIOS dump for a Lenovo Flex 5 14ITL05 laptop (IdeaPad, Type 82HS), supplied as a RAR archive of about 7.3 MB and sized for a 32 MB SPI flash chip. The file name carries the board reference 203013_1, so compare that number with the one printed on your motherboard before using it. Technicians use a dump like this to reprogram the flash with a programmer after a corrupted BIOS or a failed update. Back up the original chip contents first, and do not write the image unless the board number and revision match yours.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: LENOVO Flex 5 14ITL05 Laptop ideapad Type 82HS 203013 1 32MB. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal