Skip to content

Lenovo G50-45 NM-A281 BIOS (REV 1.0)

BIOS NM-A281 Added: Sep 14, 2020 RAR · 2.3 MB

File details

TypeBIOS
BrandLenovo
ModelG50-45
Board numberNM-A281
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size2.3 MB
Markstested by uploader, includes EC firmware
AddedSeptember 14, 2020
Updated
Original file nameLenovo G50-45 DUMP.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
ACLU5/ACLU6 NM-A281 REV:1.0 CPU: EM6010IUJ23JB AMD E1-6010 GPU: none KBC: IT8586E FX

BIOS dump for the Lenovo G50-45 laptop, Compal-built board NM-A281, revision 1.0. It includes EC/KBC firmware, is marked as tested by the uploader, and comes as a 2.3 MB RAR file. Technicians use a dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or failed update. Check that the board number and revision match your laptop, and save the original chip contents before writing.

For board NM-A281 the catalog also has 5 schematics and 14 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo G50-45 NM-A281. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal