Skip to content

Lenovo G710 BIOS (REV 2.1, 4 MB / 2 MB)

BIOS Added: Aug 2, 2023 RAR · 6.5 MB

File details

TypeBIOS
BrandLenovo
ModelG710
Revision2.1
DeviceLaptop
FormatRAR
Size6.5 MB
BIOS chip size4 MB / 2 MB
Markstested by uploader
AddedAugust 2, 2023
Updated
Original file nameLENOVO G710 DUMB02 REV 2.1 4MB & 2MB WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
LENOVO G710 DUMB02 REV 2.1 4MB & 2MB WORKING BIOS 100%

BIOS dump for the Lenovo G710 laptop, board revision 2.1, supplied for both 4 MB and 2 MB flash chips and marked by the uploader as tested. The file is a RAR archive of about 6.5 MB, named LENOVO G710 DUMB02 REV 2.1 4MB & 2MB WORKING BIOS 100%. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision on your laptop match REV 2.1 and that the chip size fits your part.

The catalog also lists 3 BIOS dumps for the Lenovo G710.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo G710. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal