Skip to content

Lenovo ThinkPad E450C AIVE1 NM-A211 BIOS

BIOS NM-A211 Added: Mar 17, 2022 ZIP · 3.6 MB

File details

TypeBIOS
BrandLenovo
ModelThinkPad E450C
Board numberNM-A211
PlatformAIVE1
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatZIP
Size3.6 MB
Marksincludes EC firmware
AddedMarch 17, 2022
Updated
Original file nameTHINKPAD_E450C_AIVE1_NM_A211_REV_1_0_2014_08_07_BIOS_&_KBC.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Lenovo ThinkPad E450C laptop, Compal board NM-A211 (platform AIVE1), revision 1.0, packaged as a ZIP of about 3.6 MB and including EC/KBC firmware. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number NM-A211 and the revision match your motherboard, and back up the original chip contents so you can recover if something goes wrong.

For board NM-A211 the catalog also has 1 schematic and 5 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo ThinkPad E450C AIVE1 NM-A211. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal