Skip to content

Lenovo X1 CARBON 14282-2M BIOS

BIOS 14282-2M Added: Nov 22, 2021 RAR · 7.8 MB

File details

TypeBIOS
BrandLenovo
ModelX1 CARBON
Board number14282-2M
Board maker (ODM)Wistron
DeviceLaptop
FormatRAR
Size7.8 MB
BIOS chip size2 MB
Marksclean ME
AddedNovember 22, 2021
Updated
Original file nameLENOVO X1 CARBON 14282-2M CLEAN ME FIXED .rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Lenovo X1 CARBON laptop, board number 14282-2M from Wistron, supplied for a 2 MB flash chip with the Intel ME region cleaned. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your motherboard, and save the original chip contents as a backup so you can restore them if needed. The archive is a RAR file of about 7.8 MB, named LENOVO X1 CARBON 14282-2M CLEAN ME FIXED.

The catalog also lists 2 schematics, 1 boardview file, and 4 BIOS dumps for board 14282-2M.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo X1 CARBON 14282-2M. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal