Skip to content

Lenovo Y560 DAKL3AMB8G1 BIOS

BIOS DAKL3AMB8G1 Added: Feb 14, 2023 RAR · 7.2 MB

File details

TypeBIOS
BrandLenovo
ModelY560
Board numberDAKL3AMB8G1
Board maker (ODM)Quanta
RevisionG
DeviceLaptop
FormatRAR
Size7.2 MB
Marksincludes EC firmware
AddedFebruary 14, 2023
Updated
Original file nameLENOVO Y560 DAKL3AMB8G1 REV G BIOS & EC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
LENOVO Y560 DAKL3AMB8G1 REV G BIOS & EC

BIOS dump for the Lenovo Y560 laptop, board number DAKL3AMB8G1, revision G, from the Quanta design. The archive also includes EC/KBC firmware, so the embedded controller can be reprogrammed alongside the BIOS. Technicians use a BIOS dump like this to rewrite the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision match your board before flashing, and back up the original chip contents first.

The catalog also lists 1 schematic for board DAKL3AMB8G1.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo Y560 DAKL3AMB8G1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal