Skip to content

Lenovo Z510 AILZA NM-A181 BIOS (REV 1.0, clean ME)

BIOS NM-A181 Added: Aug 16, 2021 RAR · 1 MB

File details

TypeBIOS
BrandLenovo
ModelZ510
Board numberNM-A181
PlatformAILZA
Board maker (ODM)Compal
Revision1.0
DeviceLaptop
FormatRAR
Size1 MB
Marksclean ME
AddedAugust 16, 2021
Updated
Original file nameLENOVO Z510 AILZA NM-A181 REV 1.0_Clear me.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Lenovo Z510 laptop, board number NM-A181, revision 1.0, platform AILZA, with an ODM listing of Compal. The dump has a cleaned Intel ME region. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and read and save the original chip contents as a backup. The file is supplied as a RAR archive, roughly 1 MB in size.

The catalog also lists 6 schematics, 3 boardview files, and 26 BIOS dumps for board NM-A181.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo Z510 AILZA NM-A181. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal