Skip to content

MSI A320M MS-7A36 BIOS (REV 1.0)

BIOS MS-7A36 Added: Aug 30, 2022 RAR · 15 MB

File details

TypeBIOS
BrandMSI
ModelA320M
Board numberMS-7A36
Board maker (ODM)MSI
Revision1.0
DeviceDesktop motherboard
FormatRAR
Size15 MB
AddedAugust 30, 2022
Updated
Original file nameMSI A320M PRO-VD S MS-7A36 VER 1.0.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
MSI A320M PRO-VD S MS-7A36 VER 1.0

BIOS dump for the MSI A320M desktop motherboard, board number MS-7A36, revision 1.0, distributed as a RAR archive of about 15.4 MB. The original file name references the A320M PRO-VD S model. A dump like this is used with a programmer to reprogram the SPI flash chip after a corrupted BIOS or a failed firmware update. Before flashing, confirm that the board number and revision printed on your motherboard match MS-7A36 and 1.0, and back up the original chip contents so you can restore them if needed.

For board MS-7A36 the catalog also has 1 schematic, 5 boardview files, and 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI A320M MS-7A36. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal