Skip to content

MSI B150M MS-7982 BIOS

BIOS MS-7982 Added: Sep 9, 2023 RAR · 15 MB

File details

TypeBIOS
BrandMSI
ModelB150M
Board numberMS-7982
Board maker (ODM)MSI
DeviceDesktop motherboard
FormatRAR
Size15 MB
Markstested by uploader
AddedSeptember 9, 2023
Updated
Original file nameMSI B150M BAZOOKA MS-7982 TESTED BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
MSI B150M BAZOOKA MS-7982 TESTED BIOS

BIOS dump for the MSI B150M motherboard, board number MS-7982, supplied as a RAR archive of about 14.7 MB. The uploader marks it as tested, though the catalog has not verified that claim. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision on your motherboard match MS-7982 before flashing, and back up the original chip contents first so you can restore them if the write goes wrong.

For board MS-7982 the catalog also has 1 schematic and 4 boardview files.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI B150M MS-7982. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal