Skip to content

MSI GF63 MS-16R4 BIOS

BIOS MS-16R4 Added: Aug 22, 2024 RAR · 12 MB

File details

TypeBIOS
BrandMSI
ModelGF63
Board numberMS-16R4, MS-16R41
Board maker (ODM)MSI
Revision1.0
DeviceLaptop
FormatRAR
Size12 MB
BIOS chip size16 MB
Marksincludes EC firmware
AddedAugust 22, 2024
Updated
Original file nameMSI GF63 MS-16R4 MS-16R41 VER 1.0 16MB BIOS & EC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
MSI GF63 MS-16R4 MS-16R41 VER 1.0 16MB BIOS & EC

BIOS dump for the MSI GF63 laptop, boards MS-16R4 and MS-16R41, BIOS version 1.0, supplied for a 16 MB flash chip and including EC/KBC firmware. The archive is a RAR of about 11.6 MB. A technician uses a dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or a failed update, and the EC/KBC part is relevant when the embedded controller needs restoring too. Confirm that your board number and revision match the file before flashing, and read out and save the original chip contents first.

The catalog also lists 1 boardview file for board MS-16R4.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI GF63 MS-16R4. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal